Operating manual - English
Optika
24
Copyright Silca 2017
-
Press ENTER, a list will appear of alternative articles:
4 - SAVE PROFILE
The following display will appear:
1) Turn the ENTER knob to select the field into which the data will be entered.
- The selected field will be highlighted in yellow.
2) Press ENTER; the display will show a list of characters:
•
Turn the left-hand ESC knob to scroll the fields up and down.
•
Turn the right-hand ENTER knob to scroll the fields from left to right; choose the character and press
ENTER to confirm.
- Going on to the next character the proposed letter is the last one selected.
-
Characters permitted:
Name: 0123456789ABCDEFGHILMNOPQRSTUVZXYWKJ-%/&_
Make: 0123456789ABCDEFGHILMNOPQRSTUVZXYWKJ-%/&_
Hook: 0123456789ABCDEFGHILMNOPQRSTUVZXYWKJ-%/&_
-
MAX limit for fields:
Name:
max 14 characters
Make:
max 14 characters
Hook:
max 8 characters
•
To delete the last edited character:
- select the "#" character, bottom right of the display and press ENTER.
•
To save a text:
- press ESC to exit, then press ENTER to confirm.
•
To save a read profile:
- select the “Save” symbol (disk) and highlight by turning the ENTER knob, then press the knob in.
A new key blank can be saved with an existing name, which will be overwritten by the new reading.
The key blank name is required (at least one character).
The key blank name must be unique in the database. Key blanks with the same name cannot be used.
Note: if no name is given to a key blank, it will not be saved.
Alternatives
AB1X
AB1BZ
AB1Q
AB1DA
AB1 : SILCA
Save read profile
Name:
Make:
Hook:
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z 0 1
2 3 4 5 6 7 8
9 - % / & _ #