Optika
Operating manual - English
Copyright Silca 2017
19
Fig. 24
•
For bit keys, if the profile appears to slope (fig. 24), it must be aligned horizontally so that the
cuts can be read properly.
- If the key has been rotated a great deal to do this, the previous step MUST be repeated
(“view cuts”) so that cut sizes can be read properly.
- Then, turn the clamp/key slightly to the left or right until the top bar shows a thin line (fig.
23). Make sure the profile outline is well defined with reference to the “profile luminosity
bar”.
-
Press the ENTER button to start a search. A few seconds later the display will show the result of the
search, comprising a list of the keys found. Examples:
Fig. 25
Fig. 26
ENTER
Groups of keys found
Identical keys
(profile, stem, bit)
ESC
2nd group
1st group
Key thickness or
stem diameter
Bit length or stem length
from stop to tip
Supplemental data
graduated scale
Profile compatibility
Hook position
