Operating manual - English
Optika
16
Copyright Silca 2017
6.1.1
KEY POSITIONING
Flat - Shoulder stop
Flat - Tip stop
Bit male (with light shade device)
Bit female (with light shade device)
Pump (with light shade device)
ATTENTION: the key must be carefully cleaned. Any residue on the profile, such as grease, deposits, filaments,
dust or whatever, may cause errors (use the brush provided).
Flat keys Bit keys
Example: FLAT - SHOULDER STOP
Example: DOUBLE BIT KEY
illuminators
illuminators
oscuratore
key stop
end of milled
channels
-
The key stop must be past the illuminators
.
-
The end of milled channels must be beneath
the illuminators
.
-
The bitting of single side keys must face left
.
-
The bit must go past the illuminators
.
-
A minimum of 10 mm. of stem must be
inserted
.
-
The key stem must be entirely surrounded by
the light shade device
.
Example: FLAT - TIP STOP
Example: BIT KEY
illuminators
illuminators
light shade
end of milled
channels
-
The end of milled channels must be beneath
the illuminators
.
-
The bitting of single side keys must face left
.
-
The bit must go past the illuminators
.
-
A minimum of 10 mm. of stem must be
inserted
.
-
The key stem must be entirely surrounded by
the light shade device
.
key stop
min.
10 mm
device
min.
10 mm