7
MACHINE REGULATION AND UTILIZATION
To get the most out of your key-cutting machine, check gauging periodically.
ATTENTION: before regulating the machine, turn it off and remove the plug.
7.1
Micrometric tracer point
The use of a micrometric tracer point on a machine for cutting bit and pump keys not only provides perfect fast
readings, but also rapidly resolves all those small depth variations needed when worn keys are involved.
NOTE: every notch on the micrometric ring nut corresponds to a movement of 0,05 mm.
Fig.30 - Omnia / Omnia 650rpm / Omnia MAX
Fig.31 - Omnia W MAX
7.2
Tracer point spring
The spring function facilitates the search for spaces with the tracer point before the cutter makes the cuts.
•
To enable the tracer point spring:
Turn the cam (D1) to the left (Fig.32).
• To disable the tracer point spring:
Turn the cam (D1) to the right (Fig.33).
Fig.32 - spring ENABLED
Fig.33 - spring DISABLED
Operating Manual
OMNIA / OMNIA 650rpm / OMNIA MAX / OMNIA W MAX
Copyright Silca 2014
24
