LANCER PLUS
Operating manual
Copyright Silca 1998
17
7.4
Cutting of keys with SIDE and BULLET WARDS
Install the keys and position the main carriage on the right hand side (position 2 - fig. 12).
SIDE WARDS
1) position the tracer as shown in fig. 22 and
operate as follows:
2) locate the tracer into the side ward on the
right hand side of the bit and lower the
motor carriage cutting the key in a
downward movement.
To cut the left hand side repeat as above only
cut in an upward movement.
Fig. 22
Fig. 23
N
Summary of Contents for D411202XA
Page 1: ... Operating manual D411202XA vers 2 0 ...
Page 4: ......
