EtherHaul™ 8000 Installation, Operation and Maintenance Manual
Page 71
VID – VLAN ID that LLDP messages will be sent on. Default is
none
(untagged).
IP Index – Lowest, Highest or IP index (1-4). The IP address the system will
respond with in the LLDP information reply. Default is
Highest
.
7.5.2
LLDP Status
Figure 7-15 Network Page: LLDP Status
This section displays the information received from the peer device:
Chassis ID – displays the IP address (network address, typically refer to IP #1) of
remote device
Chassis ID Subtype – will be 'network-addr'
Port ID – displays the received MAC address
Port ID Subtype – will be 'mac-addr'
Port Description – The port connected at the peer device
System Name – of peer device
System Description – of peer device
Mng. Address – IP address that peer device reports. As there can be multiple IP
addresses, the device reports the IP address according to
LLDP
Configuration: IP Index
configured above.
Note:
By default, LLDP is enabled on the radio port (Eth0) and disabled on all line Ethernet
ports).
Disabling LLDP on all ports including the radio, will pass LLDP packets transparently
over the radio.
