EtherHaul™ 8000 Installation, Operation and Maintenance Manual
Page 42
4
Radio Configuration and Monitoring
The radio link parameters and radio link monitoring are managed in the Radio page.
This chapter includes the following topics:
Settings
Advanced Settings
Maintenance
Modulation Table
Statistics
CLI commands
4.1
Settings
Figure 4-1 Radio Page: Settings
This section allows configuring the following parameters:
Channel Bandwidth [MHz] – 250, 500, 1250 or 2000MHz (model dependent).
Default is 2000MHz.
Tx Frequency [MHz] – transmit frequency.
o
Country : Approved Frequency list per country regulation rules
(model dependent).
[Default = Worldwide. All available Frequencies]
i.e. Choosing a country from the picklist will enable only the allowed
channels in this country.
Rx Frequency [MHz] – R/O field, updated based on Tx frequency. Fixed 10GHz
spacing between Tx and Rx frequencies.
Tx Power [dBm] – radio’s transmit power. Default is the max power, based on
product’s specs. Minimum configurable Tx power is -35dBm (note that actual
minimum Tx power is based on product’s specs).
