SIKA UC TC, Manual Instruction

Page: 17 / 40

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 17/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: info@SIKA.net, web: www.SIKA.net
Voltage or temperature generation/incremental editing?
•
Press the F2 key to display the edit menu.
•
Using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), choose the
INCREASES
mode and confirm (
VAL
key).
The values emitted are those defined in the
CONFIGURATION/RAMP
menu (see the chapter entitled Related
functions).
•
Using the navigation key (
↑
↑ ↑
↑
), start the automatic increases phase (following the parameters programmed in
the
CONFIGURATION/RAMP
menu).
•
Using the navigation key (
↓
↓ ↓
↓
), you can decrease automatically starting from the max. programmed voltage
(or temperature).
•
Using the navigation key ( ), you can increase manually the voltage (or temperature) emitted (following
the parameters programmed in the CONFIGURATION/RAMP menu).
•
Using the navigation key (
   
), you can decrease manually the voltage (or temperature) emitted starting
from the max. programmed voltage.
Voltage or temperature generation/single ramp editing?
•
Press the F2 key to display the edit menu.
•
Using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), choose the SINGLE RAMP mode and confirm ( VAL key).
The values emitted are those programmed in the
CONFIGURATION/RAMP menu (see the chapter entitled Related
functions).
•
Using the navigation key (
↑ ↑ ↑ ↑
), start the automatic increases phase (following the parameters programmed in
the
CONFIGURATION/RAMP
menu).
•
Using the navigation key (
↓
↓ ↓
↓
), you can decrease automatically starting from the max. programmed voltage
(or temperature).
•
Using the navigation key ( ), you can increase manually the voltage (or temperature) emitted (following
the parameters programmed in the
CONFIGURATION/RAMP
menu).
•
Using the navigation key (
   
), you can decrease manually the voltage emitted starting from the max.
programmed voltage (or temperature).
The Hold key allows you to stop generating or to resume it
You can resume the generation of the ramp in step-by-step mode by pressing the navigation keys (
   
and ) or in
automatic generation using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
).
You can delay the emission by a programmable amount of time (in the
CONFIGURATION/RAMP/DELAY
menu )
Indicates that
the mode used is
the arrows mode
Digit selected
during editing