SIKA UC TC, Manual Instruction

Page: 35 / 40

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 35/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: info@SIKA.net, web: www.SIKA.net
E.3 “Preferences” setting.
E.3.1 Filtering setting.
In the event of noisy measurements, you can filter the latter to make the value displayed on the screen more stable.
•
Access this menu using the
F1
key (configuration menu).
•
Select the Setup field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Filtering field by pressing the F1 key.
•
Four filtering values are available (OFF, 0.5s, 1s and 2s). Select these values using the navigation keys
(
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
).
•
Confirm by pressing the VAL key.
E.3.2 Display resolution setting.
In the
CONFIGURATION/SETUP/PREFERENCE menu, you can select the desired display resolution:
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the
Resolution
field by pressing the F1 key.
Three types of resolution are available: high (res=1µV), medium (res=10µV) and low (res=100µV).
•
Select this resolution using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
).
•
Confirm by pressing the VAL key.
E.3.3 Lighting duration setting.
In the same menu ( CONFIGURATION/SETUP/PREFERENCE ), you can control the duration of the lighting
(manual, 10s or 1min). Press the ON/OFF key briefly to turn on the lighting for the selected duration (10s or
1min). Press it again briefly to start the timing or to turn off the lighting in the case of the manual mode.
•
Access this menu using the F1 key.
•
Select the Setup field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the
Preferences
field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the
Lighting
field by pressing the F1 key.
•
Choose the manual or timed mode using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
).
•
Confirm by pressing the VAL key.
E.3.4 “Key beeping” setting.
In the
CONFIGURATION/SETUP/PREFERENCE menu, you can emit a beeping sound every time a key is
pressed:
•
Access this menu using the F1 key.
•
Select the
Setup
field using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), then confirm.
•
Select the Preferences field using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), then confirm.
•
Select the Key Beeping field using the F1 key.
•
Using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
), select the ON or OFF mode then confirm by pressing the VAL key (if
the parameter settings are completed or go to the next field using the F1 key).