SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany
29/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: [email protected], web: www.SIKA.net
Record burst:
This function makes it possible to record the burst in the memory.
•
You are then requested to enter the name of a file. Using the navigation keys (
↑
↑
↑
↑
and
↓
↓
↓
↓
), scroll down the
letters.
•
Using the navigation keys (
and
), move the cursor by one position.
•
Using the F2 key(
), you can delete the characters entered
•
Once you have entered the file name, confirm by pressing the
VAL
key.
Open burst:
Allows you to choose a burst among many and to open it to display the values. At this level, you can obtain
information on the acquisition burst, such as the number of measurements, the date of acquisition, the sensor used,
etc.
New free burst:
Allows you to start a new acquisition burst. If a burst is under way, you will be requested to save it.
Burst management:
Allows you to display all the bursts recorded. At this level, you can delete one or all bursts.
Statistics:
Allows you to find out the number of bursts recorded, the number of bytes free as well as the number of
measurements which can be recorded.
D.5.1
Synthesiser configuration
D.5.1.1
Configuration of synthesiser points
The configuration of the synthesiser points is identical to that of the default values.
D.5.1.2
Configuration of synthesiser parameters
The configuration of the synthesiser parameters is performed in the
configuration/Synthesiser/Parameters
menu,
obviously providing the Synthesiser mode has been confirmed.
Careful, the values (points) must be recorded first
