SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany
30/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: [email protected], web: www.SIKA.net
•
Once you have selected the
configuration/Synthétiseur/ Paramètres
(configuration/Synthesiser/Parameters) menu, confirm by pressing the
VAL
key.
This screen allows you to configure the emission:
First point:
This is the 1
st
point to be emitted. It is not necessarily the 1
st
point in the table of values.
Last point:
This is the last point to be emitted. It is not necessarily the last point in the table of values but this point number
must be below the number of points recorded.
Should this not be the case, it will be impossible to record the configuration of the synthesiser parameters
Duration:
This is the amount of time required for the emission of all the points that need to be emitted (Last point - first
point).
Repetition:
This is the number of cycles that need to be performed.
Time frame:
This is the time lapse between 2 repetitions.
