Technical data
TP 28 1300 E
- 52 -
© SIKA
•
Ba_TP281300E
•
08/2015
9
Technical data
The technical data of customised versions may differ from the data in these instructions.
Please observe the information specified on the type plate.
9.1
Characteristics TP 28 1300 E
Type
Characteristics
TP 28 1300 E
Calibrator
Temperature range
400…1300 °C
Tolerance
± 2 °C
Stability (of the control)
± 0.5 °C
Measurement zone
at 200 mm
Impact of the operating tem-
perature (0…50 °C) on the ac-
curacy
± 0.02 °C
Detection speed
130 ms
Control sensor
Internal
Display
Display 2-line:
-
Reference temperature
-
Set point temperature
4-digit 7-segment display, 7 mm high
red: first line of the display
green: second line of the display
Display range
0…1300 °C
Resolution
1 °C
Display unit
°C or °F (optional)
Sensor break
-
Display
-
Behaviour
– – – –
Turn off the controller
Behaviour when temperature is
exceeded in the housing
Temperature fuses switch off the heating
when the limit values are exceeded.
Electrical characteristics
Supply voltage
100…240 VAC ± 10
% • 50/60
Hz
Power consumption
~ 1000 VA
Fuse
100…240 VAC
• 10
A slow-blow
Block temperature control
PID controller
Controller outputs:
-
Heater control
-
Fan control
voltage output for control of solid state relay (8 mA / 8 VDC)
relay SPDT (8 A-AC1, 3 A-AC3 / 250 VAC); 100,000 switching cycles
Degree of protection
(EN 60529)
IP 20
