41
BLUETOOTH OPERATION
Before Using the Bluetooth
Before using the Bluetooth, it’s necessary to perform the following steps. For more operating
details, refer to each section below.
1. Select the “Bluetooth” option in the General setup and select the “On” option to activate the
Bluetooth feature.
2. Pair your mobile phone to this unit (refer to the “Pairing” operation). It is necessary to pair
your phone to the unit. Without pairing, Bluetooth is not available.
The Bluetooth Indicator
There is a Bluetooth indicator (
) at the top of the touch screen.
When the Bluetooth function is “Off”, the indicator is grey.
When the Bluetooth function is “On” and no phone is connected to the unit, the indicator will
blink.
If a phone has been connected to the unit, the indicator is on solid.
Accessing Bluetooth Mode
Access the MAIN menu first and then touch the
button on the screen to access Bluetooth
mode.
Touch the
button at the top of the touch screen to access Bluetooth mode directly.
Bluetooth User Interface
Dial Interface
1
8
6
2
3
4
7
5
1.Current source indicator, touch this area to access MAIN menu.
2.Touch to access the dial interface.
3.Touch to access the Phone book.
4.Touch to access Bluetooth setup.
5.Touch to switch the audio output between the unit and the mobile phone.
6.Make use of these buttons to achieve some base functions of the phone.
Summary of Contents for TCR-07
