Signature TCR-07 Owner'S Manual Download Page 42

Page: 42 / 131

According to the above instruction 16, when you press the

button, the touch screen will

Display The following.

The TFT displays the root directory list classified by the iPod, from which you can select your

favorite songs.

You can choose a play list from your iPod play lists and then select a song to listen to.

Playback of Video on iPod

For playback of video on iPod, press the

button to enter, the touch screen will display the

following.

If there are videos on iPod and you select them on iPod, they will start to play, otherwise there

will be nothing on the display. However, you can return to listen to your music by pressing the

button again.

NOTE:

All video control functions are done on the iPOD video, the touchscreen only controls

audio portions of iPOD functionality.

Summary of Contents for TCR-07




































































































































Search results

Summary of Contents for TCR-07

Reviews:

Related manuals for TCR-07

Brands by name

Popular brands

Signature TCR-07, Owner'S Manual

Search results

Summary of Contents for TCR-07

Reviews:

Related manuals for TCR-07

Brands by name

Popular brands