Signature TCR-07 Owner'S Manual Download Page 28

Page: 28 / 131

1.Touch to Play/Pause

2.Touch to stop

3.Touch to fast reverse

4. Touch to fast forward

5.Touch to repeat playback

6.Touch to repeat from A to B. Select the repeat point A wherever you want to start and the point

B wherever you want to end, then, DVD displays from A to B continually.

7.Touch to switch among LEFT, RIGHT and STEREO.

8.Touch to display Sub-title

9.Touch to return to DVD main menu

Controlling Playback

Stopping Playback

Touch the stop button

on the screen or press the (

) button on the remote control to

stop DVD play; touch the play/pause button on the screen or the (OK) button on the remote

Control to resume disk play.

Pausing Playback

Touch the play/pause button

on the screen to suspend or resume disc play.

Repeat Playback

Press the Repeat button

on the screen or on the remote control to alter repeat mode

according to the following:

• DVD: Repeat Title, Repeat Chapter, Repeat Off

• VCD (PBC Off): Repeat Single, Repeat Off

• MP3: Repeat Single, Repeat Folder, Repeat Off

NOTE: For VCD play, the repeat function is not available if PBC is on.

PBC (Play back Control) (VCD Only)

For VCD with play back functionality, play back control (PBC) provides additional controls for

VCD playback.

Press the (ROOT) button on the remote control to toggle the PBC function “On”/”Off”. Once PBC

is on, playback starts from track one of the play list.

NOTE:

When PBC is activated, fast forward, slow playback, and previous/next track are

available. Repeat and direct track selection are not available. When PBC is activated, selecting

random, scan, or search playback automatically deactivates PBC.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to repeat.

• Press the Repeat A-B button (

) on the screen or on the remote control to set the start

point (A) of the repeated section.

• Press the Repeat A-B button (

) again once you reach the desired end point (B) of the

repeated section. The selected portion of the DVD will now repeat continuously.

• Press the Repeat A-B button (

) again to cancel the A-B section setting and stop repeat

play.

Accessing the DVD Menu

1.You can touch the area F, and then touch the

button to recall the main DVD menu.

Summary of Contents for TCR-07




































































































































Search results

Summary of Contents for TCR-07

Reviews:

Related manuals for TCR-07

Brands by name

Popular brands

Signature TCR-07, Owner'S Manual

Search results

Summary of Contents for TCR-07

Reviews:

Related manuals for TCR-07

Brands by name

Popular brands