21
Select FM/AM Band
Touch the
button on the screen, or press the BAND button(
)on the remote control to
change among the following bands: FM-1, FM-2, FM-3 and AM.
Auto Tuning
Press the button (
) on remote control or touch the
button on the screen to seek the
next available channel by increasing the tuning frequency. Press the button again to stop
searching.
Press the button (
) on the remote control or touch the
button on the screen to seek
the next available channel by decreasing the tuning frequency. Press the button again to stop
searching.
Manual Tuning
Press the
button on the remote control or touch the
button to increase the tuning
frequency one step at a time.
Press the
button on the remote control or touch the
button to decrease the tuning
frequency one step at a time.
Using Preset Stations
12 numbered preset buttons store and recall stations for each band. Front 6 stored stations (P1-
P6) for the current band appear on the screen, touch the channel directly for use.
You can touch the arrow buttons
on the screen to see the other 6 stations.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch and hold an onscreen preset button (6) for three seconds. The preset number appears
at the top of the screen.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored station.
Auto Store (AS)
Press and hold the
button on the screen to automatically scan and store all stations in
current band.
Summary of Contents for TCR-07
