27
INSTALLATION
ENGLISH
Engaging the Anti-tip Device
•
Move the range close enough to the opening to
plug into the receptacle.
•
Slide the range into position ensuring that the back
leg slides under the anti-tip bracket. The range
should sit flush against the back wall when properly
installed.
•
Carefully attempt to tip the range forward to ensure
that the anti-tip bracket is engaged properly. If
properly installed, the anti-tip bracket will prevent
the range from being tipped. If the range can be
tipped, reinstall the range until the anti-tip bracket is
properly installed and the range will not tip forward.
•
Turn on electrical power. Check the range for
proper operation.
Test Run
Check if the range is properly installed and run a test
cycle.
1
Remove all packing materials from inside the
oven. Press
Power
button located next to the
display and set initial settings such as language
and time.
(Refer to "Getting Started" in the Operation
section.)
2
Check the operation of the oven. Select Bake in
the cooking mode screen then Start.
3
The oven should finish preheating in 15 minutes.
4
After making sure the oven operates properly,
turn the temperature in the oven to 550 °F
(288 °C) and leave the oven on for at least an
hour. This helps remove any residual oil which
might cause smoke or odor when first using the
oven.
NOTE
Smoke may come out of the range when it is first
used.
Summary of Contents for SKSGR360GS
Page 157: ...79 AIDE MÉMOIRE FRANÇAIS AIDE MÉMOIRE ...
Page 158: ...80 AIDE MÉMOIRE AIDE MÉMOIRE ...
Page 159: ...81 AIDE MÉMOIRE FRANÇAIS ...
