Signamax
™
065-7921PoE 12-Port 10/100/1000BaseT/TX Web Smart PoE Switch
65
4-2-6. Aggregation Configuration
The Aggregation (Port Trunking) Configuration is used to configure the settings of Link
Aggregation. You can bundle more than one port with the same speed, full duplex and the
same MAC to be a single logical port, thus the logical port aggregates the bandwidth of these
ports. This means you can apply your current Ethernet equipments to build the bandwidth
aggregation. For example, if there are three Fast Ethernet ports aggregated in a logical port,
then this logical port has bandwidth three times as high as a single Fast Ethernet port has.
Function name:
Aggregation Configuration
Function description:
Display the current setup of Aggregation Trunking. With this function, user is allowed to
add a new trunking group or modify the members of an existed trunking group.
Note:
Check the following to avoid
errors
in
configuration:
When configur
ing
the link aggregation function,
you
should check
that whether
the
aggregated ports are
in
full-duplex mode
as well as their
speed
is the same or not
. The
aggregated ports are in the same VLAN group.
Parameter description:
Normal:
Set up the ports that do not join any aggregation trunking group.
Group 1~8:
Group the ports you choose together. Up to 12 ports can be selected for each group.
Fig. 4-12
