manualshive.com logo in svg

SignaMax 065-7921PoE, User Manual

Share
Download
SignaMax 065-7921PoE User Manual Download Page 9

Signamax

™

 065-7921PoE 12-Port 10/100/1000BaseT/TX Web Smart PoE Switch

 

2 

 

1. Introduction 

1-1. Overview of 12 Gigabit Web Smart Switch with PoE 

12-port Gigabit Web Smart Switch is a standard switch that meets all IEEE 802.3/u/x/z 

Gigabit, Fast Ethernet specifications. The switch included 10-Port 10/100/1000Mbps TP and 2-
Port Gigabit TP/SFP Fiber Web Smart management Ethernet Switch. The switch can be 
managed through Ethernet port using Web-based management unit, associated with web-
based management, the network administrator can logon the switch to monitor, configure and 
control each port’s activity.  In addition, the switch implements the QoS (Quality of Service), 
VLAN, and   Trunking. It is suitable for office application.

 

In this switch, Port 11, 12 includes two types of media --- TP and SFP Fiber (LC, BiDi 

LC…); this port supports 10/100/1000Mbps TP or 1000Mbps SFP Fiber  via manual setting of 
Web UI. 1000Mbps SFP Fiber transceiver is used for high-speed connection expansion. 

This PSE switch also complies with IEEE 802.3af, its advanced auto-sensing algorithm 

enables providing power devices (PD) discovery, classification, current limit, and other 
necessary functions. It also supports high safety with short circuit protection and power-out 
auto-detection to PD. 

 

⎯ 

1000Mbps LC, Multi-Mode, SFP Fiber transceiver 

⎯ 

1000Mbps LC, 10km, SFP Fiber transceiver 

⎯ 

1000Mbps LC, 30km, SFP Fiber transceiver  

⎯ 

1000Mbps LC, 50km, SFP Fiber transceiver 

⎯ 

1000Mbps BiDi LC, 20km, 1550nm SFP Fiber WDM transceiver 

⎯ 

1000Mbps BiDi LC, 20km, 1310nm SFP Fiber WDM transceiver 

 

10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE 802.3/u/x/z Gigabit, 

Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver is a Gigabit Ethernet port that 
fully complies with all IEEE 802.3z and 1000Base-SX/LX standards.  

1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic Wavelength 

Division Multiplexing (WDM) technology that transports bi-directional full duplex signal over a 
single fiber simultaneously.  

 

• 

Key Features in the Device 

QoS: 

The 

switch

 offers powerful QoS function. This function supports TOS field of IP header 

(equal DSCP low 3 bits) on Layer 3 of network framework and 6 kinds of special 
network transmission events on Layer 4.

 

Summary of Contents for 065-7921PoE


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands