Signamax
™
065-7921PoE 12-Port 10/100/1000BaseT/TX Web Smart PoE Switch
55
4-2-2. Ports Configuration
Function name:
Ports Configuration
Function description:
Ports Configuration is applied to change the setting of each port. In this configuration
function, you can set/reset the following parameters, including Mode and Flow Control,
and dual media for port 11 and port 12. All of them are described in detail below.
Parameter description:
Mode:
Set the speed and duplex of the port. If the media is 1Gbps fiber, there are three
modes to choose: Auto Speed, 1000 Full and Disable. If the media is TP, the
Speed/Duplex is comprised of the combination of speed mode, 10/100/1000Mbps,
and duplex mode, full duplex and half duplex. The following table summarized the
function the media supports.
Media type
NWay
Speed
Duplex
1000M TP
ON/OFF
10/100/1000M
Full for all, Half for 10/100
1000M Fiber
ON/OFF
1000M
Full
In Auto Speed mode, no default value. In Forced mode, default value depends on
your setting.
Flow Control:
There are two modes to choose in flow control, including Enable and Disable. If flow
control is set Enable, both parties can send PAUSE frame to the transmitting
device(s) if the receiving port is too busy to handle. When it is set Disable, there will
be no flow control in the port. It drops the packet if too much to handle. Default:
Enable
Fig. 4-4
