Signamax
™
065-7921PoE 12-Port 10/100/1000BaseT/TX Web Smart PoE Switch
91
4-4-1-2. TP / Fiber Ports Status
Function name:
TP/Fiber Ports Status
Function description:
TP/Fiber Ports Status function is applied to display the latest updated status of all ports in
this switch. In this function, you can view the following setting, link status, speed and flow
control. All of them are described in detail below.
Fig. 4-28
Parameter description:
Port:
Display the port number. The number is 1 – 12. Both port 11 and 12 are optional
modules.
Link Status:
Show that if the link on the port is active or not. If the link is connected to a working-
well device, the Link Status will show the current link speed and duplex. If the
connection is broken, it will show “Down”. This is determined by the hardware on
both devices of the connection.
No default value.
Speed:
Display the speed and duplex of all port. There are three speeds 10Mbps, 100Mbps
and 1000Mbps supported for TP media, and the duplex supported is half duplex and
full duplex. If the media is 1Gbps fiber, it is 1000Mbps supported only. The status of
speed/duplex mode is determined by 1) the negotiation of both local port and link
partner in “Auto Speed” mode or 2) user setting in “Force” mode. The local port has
to be preset its capability.
