Signamax
™
065-7921PoE 12-Port 10/100/1000BaseT/TX Web Smart PoE Switch
48
4. Operation of
Web-based Management
This chapter instructs you how to configure and manage the 12 Gigabit Web Smart
Switch with PoE through the web user interface it supports, to access and manage 10
10/100/1000Mbps TP Port and 2 Gigabit TP/SFP Fiber dual media port. The switch provides
10 fixed Gigabit Ethernet TP ports and two optional Gigabit dual media ports supporting either
fiber or TP media. With this facility, you can easily access and monitor through any one port of
the switch all the status of the switch, including MIBs status, each port activity, multicast traffic,
and so on.
The default values of 12 Gigabit Web Smart Switch with PoE are listed in the table
below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Password
admin
Table 4-1
After the 12 Gigabit Web Smart Switch with PoE has been finished configuration, you
can browse it by using the IP address you set up. For instance, type http://192.168.1.1 in the
address row in a browser, it will show the following screen (see Fig.4-1) and ask you inputting
password in order to login and access authentication. The default password is “admin”. For the
first time to use, please enter the default password, then click the
<Apply>
button. The login
process now is completed.
In the switch, it supports a simple user management function allowing only one
administrator to configure the system at the same time.
To optimize the display effect, we recommend you use Microsoft IE
6.0 above, Netscape
V7.1 above or FireFox V1.00 above
and have the resolution 1024x768.
The switch supported
neutral web browser interface.
Here is the whole function tree with web user interface and we will travel it through this
chapter.