1/27/15
SigC667x / SigC641x User Guide, Rev B7
Copyright
Signalogic 2012-2014
12 / 109
2.2 Installing SigC641x Modules
In order to use a SigC641x PMC module, it must first be inserted onto a PMC-to-PCIe adapter
card. The module has been tested with a Dynamic Engineering PMC to PCIe adapter
(PCIeBPMCX1), shown in Figure 2-3, and an Integrative Innovation PMC to PCIe adapter,
shown in Figure 2-4. Ensure that a complete connection is made on the PMC interface when
inserting the module: press firmly but gently, and press at the edges of the module; i.e. not
directly on components. After insertion, check carefully for any gaps around the edges of all four
(4) PMC connectors. Also, make sure the module rests completely flat and in parallel with the
adapter card, and the module’s front bezel fits correctly into the adapter’s end-plate cut-out.
Figure 2-3, SigC6415T module on Dynamic Engineering adapter
Figure 2-4, SigC6415T module on Integrative Innovation adapter
