1/27/15
SigC667x / SigC641x User Guide, Rev B7
Copyright
Signalogic 2012-2014
66 / 109
p.14.15
would first establish a PTT call on channels 14 and 15 (using next available endpoints of 15 and
16), with channel 14 (endpoint 15) acting as the talker leg and channel 15 (endpoint 16) the
listener leg. The following entry:
c7.14.e15
will convert the PTT call to a 2-way conference call. Note that the c endpoint entry
specification
exactly
matches the talker leg of the existing call.
8) Using test system equipment as shown in Figure 4-16 above, or similar equipment, verify one
or more currently active TDM calls using handset phones.
9) To set up IP calls, take the following steps. First, enter source and remote IP addresses and
UDP ports as shown below:
1)
press ‘o’ to see operating control mode options
2)
Choose ‘>’ to disable IP-to-IP test mode
3)
Type ‘i’ to enter a source IP address, press the ‘Enter’ key, and enter a remote IP address
4)
Type ‘o’ to exit operating control mode