![background image](http://html1.mh-extra.com/html/sigma/tauro-35/tauro-35_instruction-use-and-maintenance-manual_1267948008.webp)
Instructions, use and maintenance manual
Pag. 8/48
TAURO 35-35PLUS-40-40PLUS
•
Do not wear loose clothing or with fluttering hems (ties, torn clothes, open jackets, etc.) to avoid the risk of
entanglement.
•
During maintenance and cleaning operations, the operator must release the master switch (OFF) and secure
the system (for example, by removing the plug and leaving it in a clearly visible position).
•
Never leave the machine unattended during operation, pay attention to unusual sounds or behaviour and keep
away from rotating parts. Never open the guard unless the tool has completely stopped.
•
In order to empty the machine completely, release the master switch (OFF), disconnect power by removing the
plug and leaving it clearly visible, secure it and clean with water.
4.2. Safety devices.
The machine is equipped with some devices to protect its operation and the operator's safety; they must never be
removed and modified and their operation must be periodically verified.
•
Master switch: disconnects power to the machine, for safe maintenance.
•
Circuit breaker: it interrupts power supply in case of overheating of the electric motor that moves the spiral.
•
Fixed guards: all casings and protections fixed with screws or mechanical blocks can only be removed for
maintenance, by qualified personnel and as prescribed. Once the work is completed, they must be immediately
reassembled.
•
Mobile guards: properly closed mobile guards allow the machine to be used.
A lack of these conditions prevents operation.
4.3. Safety standards applied to the machine.
As repeatedly stated in this manual, the employer must provide workers with adequate information and training,
also practical, on the correct and safe use of the machine (must be simple and understandable in relation to the
acumen that can reasonably be expected by those concerned).
The following table provides a minimum list of topics to be covered as information, training and educating of
personnel; for clarity we provide the following definitions:
information: transfer of information, knowledge, etc…, without verification of learning;
training: transfer of information, knowledge, etc ..., on special and specific topics, with verification of understanding
of the topics covered, but without practical demonstration;
training: transfer of information, knowledge, etc ..., with practical demonstration of their implementing on special
topics
Topics
Information
Educating
Training
Chapter
Hazard characterising the machine and
related risks. Use of PPE. Machine limits
and destination. Intended and/or
prohibited uses.
X
X
X
4
Safe operating method and procedures
X
X
6
Safety signs
X
X
6.1
Residual risks and measures to take to
limit them
X
X
6.2
Organisation of the manual and how to
consult it
X
X
7
Machine description
X
8
Control panel description
X
X
10.2
Storage and conservation of the machine
X
10.4