Instructions, use and maintenance manual
Pag. 33/48
TAURO 35-35PLUS-40-40PLUS
The chain is loose when it admits clearance of the bowl with machine off. To tension the belt in the
lower part of the machine, as shown in the figure, place the machine on a surface suitable for the
weight of the TAURO, and remove the lower casings (see chap. 16.1). As shown in the following
figures (1), loosen the two screws from the belt tightener plate and tension the chain. After completing
this operation, tighten the two screws (1) and put the lower casings back and reposition the Tauro
correctly. Turn on the machine to test it.
To ensure the correct chain tension, see chap. 14.4.2.
INTERVAL
METHOD
s
F,M
FOR ANY MAINTENANCE AND CLEANING OPERATIONS, THE MACHINE MUST BE
OFF AND DISCONNECTED FROM THE ELECTRIC LINE.
Before performing any of the following operations, wear PPE such as: shoes with
reinforced tip and non-slip sole, gloves.
