EAN-Startup Guide-3000-OEM
© SightLine Applications, Inc.
4
Figure 4: Alternate Bench Hardware Setup - SLA-3000-IO
5.1
Additional SightLine Adapter Boards
SightLine adapter boards provide different I/O, camera inputs, or digital outputs. The boards can be
attached directly to the 3000-OEM or through a secondary adapter allowing customers to swap out
modules for custom configurations. This setup guide assumes the initial use of the EVAL kit and the
HDSDI input. Customer specific configurations with other camera input boards is fully supported.
On the SLA-3000-IO board, VIN0/(J3) has camera channels 0 and 1 assigned. VIN1/(J4) has camera
channel 2 assigned. Both the SLA-3000-mIO and SLA-3000-IO supports SightLine interface boards on
either of these connectors.
IMPORTANT:
3000-AB board only - If the SLA-3000-AB board is installed on VIN0/J3, both analog
inputs can be used. If it is installed on VIN1/J4, only the J3 (input 0) can be used.
3000-OEM SLA-3000-IO Serial Port Camera Index
Panel Plus
J1
0/1
NA
J2
VOUT
4
NA
J3
VIN0
2
CAM0/CAM1
J4
VIN1
3
CAM2
Figure 5: 3000-OEM Serial Port and Connector Reference
6
Panel Plus
This section covers the Panel Plus setup and configuration process. Panel Plus provides a basic
graphical interface to the features and functions of the 3000-OEM and 3000-mIO board.
J1 - Serial Port 0/1
J2 - Serial Port 4
J4/VIN1 - Serial Port 3
J3/VIN0 - Serial Port 2
Ethernet Port
Network Switch or PC Direct
VOUT
SLA-PWR-C12V
Serial (alternate)
Optional
Analog
Monitor
SLA-CAB-SMA2BNC (included)
SLA-CAB-ETH0
SLA-CAB-MCX2BNC
(VIN1) to camera
3000-OEM with he
SLA-3000-IO +
SLA-3000-HDSDI-IN on VIN1
1080p Camera
SLA-PWR-A12V
HDMI Out
MicroSD Card
HDSDI Input
(Green BNC
Connector)
