EAN-Startup Guide-3000-OEM
© SightLine Applications, Inc.
7
6.
Select the
Compress
tab:
a.
Use the H.264 encoding
options to get started.
b.
In the
Output Properties
section
,
use the default
values for
Frame Step
and
Down
Sample
.
c.
In the
Streaming
parameters section,
define the destination IP
address and port.
To set these parameters
quickly, click the Use My IP
- Unicast button. This sets
the outbound destination
IP address to the network
interface card on the PC
.
d.
Click
Send
to dynamically
set the desired IP Address,
UDP Port, and UDP
delivery format (Unicast,
Multicast, or Broadcast).
e.
To save the settings and
make them recurrent
through restarts, main
menu »
Parameters
»
Save to board
.
See
for a comprehensive guide
to saving parameter
settings.
Figure 9: Compress Tab
6.1
Camera Setup and Network Selection
1.
From the main menu go to
Configure
»
Aquisition Settings.
This dialog window allows changes to
the camera configurations.
2.
Since the SLA-3000-HDSDI-IN board is on J4 on the 3000-OEM or VIN 1 on the 3000-IO, set the
Camera Index
to
Cam 2. Set the Camera Type
to
Generic Digital.
