EAN-Startup Guide-3000-OEM
© SightLine Applications, Inc.
1
1
Overview
The 3000-OEM Startup Guide provides the steps for connecting, configuring, and evaluating the 3000-
OEM video processing board on the SLA-3000-mIO interface board. The mIO is optimized for
connections in an integrated assembly. Compared to the SLA-3000-IO the mIO is smaller,
uncomplicated, has small round wire interfaces and supports a two-board stack height.
Boards with SLE options enabled use the same startup procedure.
1.1
Additional Support Documentation
Additional Engineering Application Notes (EANs) can be found on the
SightLine Applications website.
The
provides a complete overview of settings and dialog windows located in the
Help menu of the Panel Plus application.
The Interface Command and Control (
) describes the native communications protocol used by the
SightLine Applications product line. The IDD is also available as a PDF download on the
page under Software Support Documentation.
1.2
SightLine Software Requirements
IMPORTANT:
The Panel Plus software version should match the firmware version running on the
board. Firmware and Panel Plus software versions are available on the
2
Network Configuration
The 3000-OEM board can be connected directly to the host PC or through a network switch. During
startup, the board sends three DHCP discover requests in three second intervals. It will self-assign the
link-local address of 169.254.1.181 if it does not receive a response.
Refer to
for more network configuration information.
SightLine recommends assigning a static IP on the PC when a DHCP server is not present on the
network.
If additional assistance is needed to assign a static IP address to the host PC, contact a network
administrator or search online for procedures that corresponds with the current PC operating
system
.
Figure 1: Network Configuration Options
Host PC
User assigned static IP:
169.254.1.10
3000-OEM + SLA-3000-mIO +
SLA-3000-HDSDI-IN
Ethernet Cable
Default IP assigned to the 3000-OEM:
169.254.1.181
Network Switch
or PC Direct
