background image

NL Safety

WARNING ‒ Risk of health hazard!

Children can lock themselves in the appliance and endanger 

their lives.

▶ 

Do not install the appliance behind a door that blocks or 

prevents the opening of the appliance door.

▶ 

In the case of discarded appliances, remove the plug of the 

mains cable from the socket, then cut the mains cable and 

damage the lock of the appliance door so that the appliance door 

no longer closes.

WARNING ‒ Risk of suffocation!

Children can inhale or swallow small parts and choke.

▶ 

Keep small parts away from children.

▶ 

Do not allow children to play with small parts.

WARNING ‒ Risk of explosion!

Coal dust or flour in the vicinity of the device can cause explosions.

▶ 

Keep the area around the device clean during use.

WARNING ‒ Risk of poisoning!

The condensed water from this appliance is not drinking water and may be 
contaminated with fluff.

▶ 

Do not drink or continue to use the condensed water from the 

device.

Detergents and care products can lead to poisoning if ingested.

▶ 

In case of accidental ingestion, seek medical advice.

▶ 

Keep detergents and care products out of the reach of children.

8

Summary of Contents for WQ41G2M0FG

















































Reviews: