Set up and connect NL
3.
Push the water drain hose onto
the connection as far as it will go.
Water drainage connection types
PAY ATTENTION!
A clogged or closed drain can allow
accumulated waste water to flow back
into the unit.
▶
Before using the device, ensure
that the waste water drains quickly
and clears blockages.
Drain in a
siphon.
The connection position
tie with a
hose clamp
(12-22 mm) bore
gene.
the water drainage
feeding hose with
a hose guide
thing on minimum
80 cm and maximum
times 100 cm
height confirmation
gene.
4.
Insert the water drain hose into
the hose guide.
Remark: Of
can you replace the
water drain hose from
an additional device
rate like e.g.
a washing machine
on the same
connect feed from
the siphon.
Make sure that the water
drain hose is not kinked.
5.
Connect the appliance to the
water outlet.
"Connection types for water drainage",
Tip: To collect the condensed water
again in the condensed water
container (e.g. if the location of the
device is changed), undo these steps
in reverse order.
Drain in a
sink.
the water drainage
feed hose com-
crack through the
slide bend
and with the
settlement material
fix eel.
Up the bend
maximum 100
cm height
settle.
2
1
15
