Siemens WQ41G2M0FG, User Manual And Installation Instructions

Page: 31 / 48

The Ministry in essence NL
12.4 Starting the program
2.
Remove the laundry.
12.8 Switching off the device
Remark: If you want to change the
time until the program end, first set
the ready in time.
▶
Set the program selector to .
12.9 Fluff filter
▶
on Start/Pause to press.
a The display shows whether the program
maduur or the ready in time
displayed.
a After the program end, it shows
display: "End".
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the device
from fluff.
Cleaning fluff filter
12.5 Adding laundry
When the drying program is finished
or if the display shows a message
during use, clean the fluff filter. You can always remove or add the
laundry after the program has started.
1.
on Start/Pause to press.
Remark: If you do not clean the
device as described, the device
function may be impaired.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum. If you
want to avoid or abort the cooling
process, open the door.
→ "Display", page 20
Requirements
s The display shows after drying:
"end"
s or during use: .
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press Start/Pause.
1.
Open the door.
2.
Remove the fluff from the door.
12.6 Program Cancel
1.
on Start/Pause to press.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum. If you
want to avoid or abort the cooling
process, open the door.
→ "Display", page 20
2.
Open the appliance door.
3.
Remove the laundry
→ Page 31.
12.7 Remove laundry
1.
Open the appliance door.
31