Siemens WQ41G2M0FG, User Manual And Installation Instructions

Page: 40 / 48

NL Troubleshooting
Malfunction
Cause and Troubleshooting
device pauses,
but the drum
running.
Cooling process active.
▶
No error - no action required.
wrinkling. The load quantity is too high.
▶
Pay attention to the maximum load of the
→ "Programs", Page 26.
The laundry is left in the drum for too long after drying.
1.
Remove the laundry from the drum immediately after
drying.
2.
Spread the items out to let them cool.
Inappropriate program set for the type of fabric.
▶
Set the appropriate program for the type of fabric.
→ "Programs", Page 26
Easy care textiles dried too long.
▶
→
"Change drying target", page 25 .
▶
→ "Adjust drying target", Page 25.
Anti-crease not activated.
▶
Activate the anti-crease program.
→ "Buttons", Page 23
and program
broken.
Condensate tank filled.
1.
→
"Emptying the condensate container", page 34
.
2.
→
"Push in the condensation container",
page 35.
3.
→ "Starting the program", Page 31.
Water drain hose is kinked or pinched.
1.
Make sure that the water drain hose is not kinked or
pinched.
2.
Lay the water drain hose without kinks.
Water drain hose is not connected correctly.
▶
Make sure that the water drain hose is connected
correctly.
→
"Connecting the water drain hose", Page 14
Water drain hose is clogged.
▶
Flush the water drain hose with tap water.
There is a foreign object in the bottom unit
1.
→
"Open base unit", page 36.
2.
Remove any foreign objects present.
3.
→ "Close base unit", page 37.
40