NL Set up and connect
4.4 Water drain hose
1.
Pull the condensate hose from
the connection.
During drying, condensation is
created that your appliance uses for
automatic cleaning. Use the water
drain hose to direct excess
condensation water into the
wastewater.
Remarks
s Use this device with the
supplied water drain hose. When you
Page 14, you do not need to
empty the condensed water container
s You can use this optional
order service.
The condensate hose is connected to
the connection at the factory.
Remark: When removing the
condensed water hose, liquid
may escape from the
connection.
Connect water drain hose
If you do not wish to empty the
condensed water container of the device
regularly, connect the water drain hose.
2.
Push the condensate hose onto the
holder.
PAY ATTENTION!
If the device is used without a
properly connected condensation
water hose or water drain hose, liquid
may leak from the connection piece.
▶
Before using the device, connect the
condensate hose or the drain hose
in a professional manner.
Requirements
s The device and its accessories
are unpacked.
s The appliance is on the installation
place set up.
14
