Malfunctions and how to fix them
NL
Malfunctions
Lint on the laundry.
Cause/Solution
Run the (cold) program
Cotton
vŽ without laundry and detergent to
remove fluff that has accumulated in the drum during the previous
drying cycle.
Water inlet noise during
the drying phase.
The washer dryer combination uses water condensing technology,
water is constantly needed to dry the laundry. Therefore, the water tap
must be open all the time until the end of the drying phase.
Drying time extended.
■
Run the (cold) program
Cotton
vŽ to remove fluff that has
accumulated in the washing drum during the drying phase. When the
ambient temperature is higher than 30°C, the drying time may
become longer.
Insufficient air circulation in the room can increase the drying time. Ventilate
the room.
■
■
Drying program starts
not.
■
■
Additional program setting for drying not selected?
Door not closed properly?
wrinkling.
■
Wrinkling occurs when you have exceeded the maximum load or
have selected the wrong program for the type of fabric. All
necessary information can be found in the program overview
table. Remove clothing immediately after drying; wrinkling can
occur when clothes are left in the drum.
■
53
