NL
Operation of the device
Cancel the program
■
If you do not take out the laundry within
15 minutes after the drying process is
complete, the anti-crease process will
start to prevent the laundry from
creasing. The process takes
approximately 30 minutes.
0:00,
£'˜,̃ £©
and
“Ÿš are shown alternately in the
display and the symbol O is displayed
as the status symbol. You can touch
any button to start this process
to end. The door will then unlock
and the laundry can be removed.
For programs washing at high
temperatures:
1.
touch the
Start/Refill
button on.
2.
To cool laundry: select q
To rinse.
3.
touch the
Start/Refill
button on.
For programs washing at low
temperatures:
1.
touch the
Start/Refill
button on.
2.
Choose 0
Spin/Drain
p.
3.
touch the
Start/Refill
button on.
For programs in the drying process:
1.
Turn the program selector to any other
program.
2.
Wait a few minutes for the laundry to
cool and the door to unlock.
Ve
removing the laundry /
turning off the device
1.
Set the program selector to (
off).
2.
Open the door and take the laundry out
of the drum.
3.
Turn off the water tap.
Program end
Note:
Not required for Aqua-Stop
models.
“Ÿš lights up in the display and the
A and O displays are off.
Clues
When you 2 selected, the water is only
pumped out after rinsing; there will not be
centrifuged.
■
Do not leave any laundry in the drum.
They may shrink with the next wash
or other
discolor laundry.
Remove all foreign objects from the
drum and from the rubber
seal off – risk of rust.
Wipe the rubber seal dry.
Clues
■
■
When •©£ flashes on the display
before the
drying program is completed, the
temperature in the drum is high. The
drum cooling program is carried out
until the temperature in the drum is
decreased.
■
■
Leave the door and detergent
drawer open to allow any
remaining water to evaporate.
42