Siemens WN34A100NL Manual Download Page 41

Page: 41 / 60

Operation of the device

Start program

Add/Remove from

laundry

touch the

Start/Refill

button on and

hold it for about 1-2 seconds, then release

the button. It

program starts and the appliance door

is locked.

After starting the program (which only

performs washing), you can add or

remove laundry if necessary.

The Ready in time is shown on the display

panel and counts down until the program

starts. After the program has started, the

program duration is displayed. And the

symbols for the progress of the program

are lit.

touch the

Start/Refill

button on. The

appliance checks whether laundry can be

refilled.

When the following appears on

the display panel:

■

The symbol O disappears, refilling is

possible.

The symbol O lights up, refilling

is not possible.

Child lock

■

You can lock the device to prevent

accidental changes to the settings you

have made. To do this, activate it

child lock.

To resume the program you must press

the Start/Reload

knob

touch. The program continues

automatically.

To activate the child lock:
After the program starts, the buttons

Clues

■

Do not leave the door open for too

long when adding laundry, otherwise

water from the laundry may leak out of

the appliance.

■

For safety reasons, the door remains

locked when the water level or

temperature is too high or

when the drum rotates and it is not

possible to add laundry at that time.

(

varioSpeed

and B

Ready in/

Drying time

touch and hold for 3

seconds. Itw

symbol lights up on the

play panel.

dis

■

w lights up: the child lock is activated.

wflashes: when the programs and

program settings are set while the

child lock is activated.

■

Changing the program

Note:

When the program ends, “Ÿš

displayed. The door is unlocked.w stays

on to remind you to deactivate the child

lock.

If you accidentally started the wrong

program, you can change the

program as follows:

touch the

Start/Refill

button on.

And touch the

Start/Refill

knob

Choose another program.

To deactivate the child lock: Touch the
buttons (

varioSpeed

and

on again. The new program starts

from the beginning.

Ready in/Dry time

on and hold them

Note:

When drying is activated, you can

change the program directly with the

program selector.

until the symbol w disappears.

Summary of Contents for WN34A100NL





























































Search results

Summary of Contents for WN34A100NL

Reviews:

Related manuals for WN34A100NL

Brands by name

Popular brands

Siemens WN34A100NL, Manual

Search results

Summary of Contents for WN34A100NL

Reviews:

Related manuals for WN34A100NL

Brands by name

Popular brands