Siemens TIWAY I TI505 User Manual Download | Manualshive

Page: 99 / 120

background image

NIM Primitives

4-40

TIWAY 1 TI505 NIM User Manual

4.9.13.3

Write and Gather Record Primitive – Code 57

The Write and Gather Record Primitive specifies which records (as defined with Define
Record Primitive 55) will be read. It also allows you to replace any contiguous data ele-
ment locations. The Records are specified by record numbers from 1 to 20 (hex). The total
number of bytes returned by the record(s) must not cause the response to exceed the max-
imum frame length.

Following the record numbers are the descriptors associated with the write function. The
write function is performed before the gather operation. The response returns the data
associated with the requested records by starting with the lowest number record and in-
creasing to the highest record. A data record or data type separator is not provided in the
response.

NOTE

An exception will be returned if the write portion of this Primitive fails.
No data will be returned for records in error or invalid read definitions.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
97
98
99
100
101
...
»

Summary of Contents for TIWAY I TI505

























































































































Reviews:

No comments

Related manuals for TIWAY I TI505

Brand: Lab.gruppen Pages: 35

Brand: Patton electronics Pages: 75

RocketLink-G 3088/I

Brand: Patton electronics Pages: 61

Brand: Patton Pages: 12

Brand: Patton Pages: 84

OnSite 3210 Series

Brand: Patton Pages: 110

Brand: Patton electronics Pages: 2

SMARTNODE 4110 Series

Brand: Patton electronics Pages: 78

Brand: Patton electronics Pages: 8

Sentry Global Security Modem

Brand: Server Technology Pages: 22

ION 1200 Series

Brand: PaloAlto Networks Pages: 90

HomePlug AV Ethernet Bridge PLE0200

Brand: Abocom Pages: 2

ADSL/ADSL2/ADSL2+ Router 660R-6xC Series

Brand: ZyXEL Communications Pages: 282

InvenSense RoboKit1

Brand: TDK Pages: 13

Brand: Idis Pages: 17

IGS-5225-20T4C2X

Brand: Planet Pages: 16

Brand: Network Critical Pages: 200

Brand: INNOSILICON Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands