Siemens SITRANS LUT400, Operating Instructions Manual

Page: 511 / 601

Page 198 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS A5E33329501
mmm
mm
Pa
ra
m
e
te
rs
2.15.4.8. OCM Dimension 4
See table under PMD Dimensions (2.15.4.) to relate OCM Dimension 1-4
above to a specific dimension for each directly supported Primary
Measuring Device. For PMDs that are not directly supported (
Universal
Head Flow
), use a Universal Flow calculation. See
Universal calculation
support
on page 116.
For more information on PMD, see
Open Channel Monitoring (OCM)
on
page 97.
2.15.5. Universal Head vs. Flow
In the following table, enter Head and Flow Breakpoints for universal
PMDs.
Head Breakpoints: The head breakpoints for which flowrate is known,
defined in Units (2.1.1.)
.
Flowrate Breakpoints: The flowrate corresponding to each Head
Breakpoint entered, defined in Flowrate Units (2.15.3.7.).
See
Universal calculation support
on page 116 for details on how to
specify universal flows.
Entering breakpoints via SIMATIC PDM:
See
Quick Start (Flow)
in the LUT400 Communications manual
1
.
2.15.5.1. Table 1-8
2.15.5.1.1. Head 1
2.15.5.1.2. Flow 1
2.15.5.2. Table 9-16
2.15.5.2.1. Head 9
2.15.5.2.2. Flow 9
2.15.5.3. Table 17-24
2.15.5.3.1. Head 17
2.15.5.3.2. Flow 17
2.15.5.4. Table 25-32
2.15.5.4.1. Head 25
2.15.5.4.2. Flow 25
2.16. Totalizers
Available only on LUT430 (Pump and Flow model) and LUT440 (OCM model).
Head Values
Range:
0.000 to 60.000
Default: 0.000
Flowrate Values
Range:
0 to 9999999
Default: 0
1.
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01)
Note: Default settings in the parameter tables are indicated with an asterisk (*)
unless explicitly stated.