Siemens SISTORE MX User Manual Download

Page: 101 / 136

SISTORE MX RemoteView

101

Siemens Building Technologies

Fire Safety & Security Products

01.2008

The cameras in the

Select

cameras…

dialog box are displayed differently

depending on whether it was possible to set up a connection to the server or not

1st possibility: The connection to the server has been established.
The cameras configured on the server are listed (with name).

Fig. 57

Select cameras – connected to server

2nd possibility: Connection to the server was not possible.
A numbered list is shown for selection of the cameras. The camera names are
displayed only if there is a connection to the server.

NOTE

Nos. 1 to 64 of the list are reserved for analogue cameras, no. 65 and higher are for network
cameras.

Fig. 58

Select cameras – no connection to the server

Summary of Contents for SISTORE MX









































































































































Search results

Summary of Contents for SISTORE MX

Reviews:

Related manuals for SISTORE MX

Brands by name

Popular brands

Siemens SISTORE MX, User Manual

Search results

Summary of Contents for SISTORE MX

Reviews:

Related manuals for SISTORE MX

Brands by name

Popular brands