manualshive.com logo in svg

Siemens SISTORE MX, User Manual

Share
Download
Siemens SISTORE MX User Manual Download Page 63

Playback 

63 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

01.2008

 
 

17.1  Description of the menus 

17.1.1 Menu

 

File 

 

Start backup now 

A backup is normally started automatically at the preset time. An administrator can 
however start a backup process at any time using the menu option Start backup 
now. This menu function is only available if a backup process has been configured 
but no backup process is currently running. 
The beginning and end of a backup process are recorded in the logbook. Errors 
occurred during backup (e.g. target drive full) will also be recorded in the logbook. 

Cancel backup 

Using this menu option an administrator can stop a backup process. This option is 
only available when a backup process is currently running. 

17.1.2 Menu

 

View 

 

Cash box search 

Show search mask (see Section 17.2: Cash box search). 

17.1.3 Menu 

Database 

 

Delete all recorded data 

This function deletes all recordings. This is possible only for a user with “Delete“ 
authorisation. 

 

 

 

 

 

 

NOTE: 

The function “Delete all recorded data“ is only available when STOP is set. 

 

 

 

Delete old recorded data 

This function deletes recordings made before a specified time. This may also be 
carried out automatically at a pre-set point in time with the corresponding 
configuration. 

Delete marked area 

This function deletes recordings made during the time period selected in the 
timeline. 

 

 

 

 

 

NOTE 

The functions

 Delete marked area 

and

 Delete old recordings 

are not available if banking mode has 

been activated. 

 

 

 

 

Summary of Contents for SISTORE MX









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands