manualshive.com logo in svg

Siemens SISTORE MX, User Manual

Share
Download
Siemens SISTORE MX User Manual Download Page 11

Safety 

11 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

01.2008

 
 

2.3 

Meaning of the written warning notices 

 

The severity of a hazard is indicated by the following written warning notices.  

 

Signal word 

Type of risk 

DANGER 

Dangerous situation 
Death or severe bodily injury may result. 

 

 

CAUTION 

Dangerous situation 
Severe bodily injury may result. 

 

 

WARNING 

A dangerous situation can occur 
Minor injuries may result. 

 

 

NOTE 

Technical or operating information 
Disregarding this information may lead to damage to the product or property in 
the product’s vicinity. 

2.4 

Meaning of the hazard symbols 

 

The nature of the hazard is indicated by icons. 

 

 

 

 

 

Dangerous situation 

 

 

 

 

 

 

 

 

Electrical voltage 

 

 

 

 

 

 

 

 

External voltage 

Ground the component before making contact. 

 

 

 

 

 

 

 

 

Tips and information 

 

 

 

 

 

 

 

 

Important operating step or action  

For example: the system, components or controls must be at zero potential. 

 

 

 

Summary of Contents for SISTORE MX









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands