Siemens SISTORE MX User Manual Download

Page: 125 / 136

SISTORE MX RemoteView

125

Siemens Building Technologies

Fire Safety & Security Products

01.2008

Activate audio transmission

If a camera has been assigned an audio channel, this will be indicated in SISTORE
MX RemoteView by a loudspeaker symbol in the camera list next to the name of
the camera. (See Fig. 75).

Prerequisites:

The camera has been assigned an audio channel.

Mark the checkbox next to the loudspeaker symbol of the camera for which
you want to activate sound transmission.

Audio transmission will be activated.

NOTE

SISTORE MX can currently transmit only one audio channel.

Fig. 78

SISTORE MX camera list

Logbook

The logbook cannot be displayed when several servers are connected to the
RemoteView. It is only possible to open the logbook of one server.

The server can be selected from a list which contains the names or IP addresses
of all the servers that are currently connected.

Summary of Contents for SISTORE MX









































































































































Search results

Summary of Contents for SISTORE MX

Reviews:

Related manuals for SISTORE MX

Brands by name

Popular brands

Siemens SISTORE MX, User Manual

Search results

Summary of Contents for SISTORE MX

Reviews:

Related manuals for SISTORE MX

Brands by name

Popular brands