IO-Link 3SU14
12.2 Electronic modules for ID key-operated switches
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
327
12.2.5.10
Manage authorization level (individually encodable ID keys)
"Add new individual ID key" parameter
The electronic module can store up to 50 individually encodable ID keys in its permanent
memory, and it can assign each of these individually encodable ID keys to group 1 ... 4
respectively. When an individually encodable ID key from the list is used, it behaves like an
ID key from the relevant authorization level.
A list of the individually encodable ID keys can be displayed in the
Port Configuration Tool
S7-PCT
.
If an individually encodable ID key is used in the ID key-operated switch, the electronic
module detects that it belongs to the group of individually encodable ID keys.
A check is then made to see whether this key is included in the individual key list stored in
the electronics module. If the identification number of the key used is in the list, the
corresponding authorization level is determined using this list and assigned to the key used.
This key behaves like a key belonging to the relevant authorization level.
Authorization levels 1 ... 4 can be assigned to each individually encodable ID key (white).
If the identification number of the key used is not found in the individual key list, it is assigned
to the authorization level "Individually encodable ID key".
In this case, only output 4 is activated, and the illuminated surfaces on the ID key-operated
switch flash yellow.
The authorization level is assigned via the Port Configuration Tool
S7-PCT
.