Spare parts and accessories
5
Order data for accessories
The following accessories are available:
Component
Article number
USB flash drive 16 GB, bootable USB 3.0
6ES7648-0DC60-0AA0
CompactFlash card 8 GB, empty as user memory
6FC5313-6AG00-0AA0
CompactFlash Card 2 GB, empty
6FC5313-5AG00-0AA2
Compatibility of CompactFlash cards
For SINUMERIK 828D, only the memory card (2 GB) with Article number
6FC5313-5AG00-0AA2 is permitted.
SINUMERIK control system supports the file systems FAT16 and FAT32 for
CompactFlash cards. You may need to format the memory card if you want to ensure the
compatibility of the memory card with the SINUMERIK, or if you wish to use a memory card
from another device. Formatting the memory card will permanently delete all data on it.
● If you cannot use a memory card with SINUMERIK, then it possibly involves a memory card
that has not been formatted for this control system (e.g. Ext3 Linux file system), or a memory
card with a defective file system or an incorrect memory card type.
● Insert the memory card carefully and the right way round into the memory card slot (observe
indicators such as arrow or similar). This way you avoid mechanical damage to the memory
card or the device.
● Do not remove the memory card while it is being accessed. This can damage the memory
card and the SINUMERIK as well as the data on the memory card.
Only use memory cards that have been approved by Siemens for use with SINUMERIK. Even
though SINUMERIK follows general industry standards for memory cards, it is possible that
memory cards from some manufacturers will not function perfectly in this device or are not
completely compatible with it (you can obtain information on compatibility from the memory
card manufacturer or supplier).
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1
237
