Siemens SINAUT MD720-3, System Manual, Page: 38 / 76

SINAUT MD720-3 in Terminal Mode
SINAUT MD720-3
38
C79000-G8976-C211
AT+CPIN Enter PIN
Test
Command: AT+CPIN=?
Response: OK
Read command
Command: AT+CPIN?
Response: +CPIN: <code>
Executive command
Command: AT+CPIN=<pin> [,<newpin>]
Response:
OK
Parameter: <code>:
Values reserved by this device:
READY Device is not pending for any password
SIM PIN Device is waiting SIM PIN to be given
SIM PUK Device is waiting SIM PUK to be given. Also, a second pin, <newpin>, is
used to replace the old pin in the SIM and should thus be supplied
SIM PIN2 Device is waiting SIM PIN2 to be given (this <code> is recommended to
be returned only when the last executed command resulted in PIN2
authentication failure (i.e. +CME ERROR: 17); if PIN2 is not entered right
after the failure, it is recommended that ME does not block its operation)
SIM PUK2 Device is waiting SIM PUK2 to be given (this <code> is recommended to
be returned only when the last executed command resulted in PUK2
authentication failure (i.e. +CME ERROR: 18); if PUK2 and new PIN2 are
not entered right after the failure, it is recommended that ME does not
block its operation). Also, a second pin, <newpin>, is used to replace the
old pin in the SIM and should thus be supplied
PH-NET PIN ME is waiting personalization password to be given
<pin>, <newpin>:
String type value (8 characters max.)
Notice:
-