Siemens Sinamics Connect Series Operating Instructions Manual Download Page 77

Page: 77 / 101

Getting connected to MindSphere

6.5 Data mapping

SINAMICS CONNECT
Operating Instructions, 10/2018, A5E45421408

7. Select the variable you want to map to the data point, for example,

"port1_Act_filtered_DC_link".

8. Click "Accept", and the data point is mapped.

The graphic below shows the new data mapping added.

Note
Only units and data types that match exactly with the aspects and variables are available.

If the units or the data types are not matched, the variable cannot be connected to the

data point (also case sensitive).

9. Repeat steps 4 to 8 until all of your data points are mapped.

Note
You cannot map the data point named "Others". It is an automatically generated data

point for time series uploading protection buffer.

Result

The data points are now mapped to the variables.

Summary of Contents for Sinamics Connect Series






































































































Search results

Summary of Contents for Sinamics Connect Series

Reviews:

Siemens Sinamics Connect Series, Operating Instructions Manual, Page: 77 / 101

Search results

Summary of Contents for Sinamics Connect Series

Reviews: