Siemens Sinamics Connect Series Operating Instructions Manual Download Page 38

Page: 38 / 101

Connecting

4.2 Connecting the converter to the device

SINAMICS CONNECT

Operating Instructions, 10/2018, A5E45421408

4.2.2

Identifying the converter (optional)

The SINAMICS CONNECT supports port modes of "Auto" and "Manual" which you can set

via the SINAMICS CONNECT Web server. For more information, see Section "Configuring

ports (Page 50)".

●

Auto (default): Press the USER button to identify the converter at the port immediately, or

wait (up to 5 minutes) for the device to identify the converter.

●

Manual: Ignore the step of identifying the converter. In this case you need to set the basic

parameters of the converter manually via the Web server.

Requirement

●

The converter is connected to the device.

●

The device is powered on.

●

The port mode is set to "Auto".

Procedure

Keep pressing the USER button for at least 1 second to identify the converter.

Summary of Contents for Sinamics Connect Series






































































































Search results

Summary of Contents for Sinamics Connect Series

Reviews:

Siemens Sinamics Connect Series, Operating Instructions Manual, Page: 38 / 101

Search results

Summary of Contents for Sinamics Connect Series

Reviews: