Siemens Sinamics Connect Series Operating Instructions Manual Download Page 65

Page: 65 / 101

Getting connected to MindSphere

6.3 Creating an asset in Asset Manager

SINAMICS CONNECT
Operating Instructions, 10/2018, A5E45421408

"Aspects" user interface

①

Navigation bar

④

Create a new aspect

②

Search field

⑤

Detail view of aspect

③

Selection list

⑥

Edit or delete aspect

Requirement

●

You have logged in to MindSphere.

●

You have accessed the "Aspects" page in Asset Manager.

Procedure

To create a new aspect, click , and the "Create aspect" window is open.

Note
Make sure your user role is "TenantAdmin", otherwise, you cannot create aspect, type or

asset in Asset Manager.

Under "Aspect information", enter the name of the aspect in the "Name" input filed, for

example, "SC_port1".
Note: You are recommended to name the aspects in the format of "XXX_portX".

When required, enter the description for the aspect.

Summary of Contents for Sinamics Connect Series






































































































Search results

Summary of Contents for Sinamics Connect Series

Reviews:

Siemens Sinamics Connect Series, Operating Instructions Manual, Page: 65 / 101

Search results

Summary of Contents for Sinamics Connect Series

Reviews: