Siemens SIMATIC RI 45 PIII Series, Manual

Page: 79 / 132

2-51
RI 45 PIII, Manual
C79000-G7076-C817-01
Supervisor
Password is
[Disabled] Password is not active
[Enabled Password is active. Changes the BIOS Setup can only
be made after the password has been entered. A user
password can be entered.
When the password is entered, the field is automatically switched
from [Disabled] to [Enabled] .
User
Password is
[Disabled] Password is not active
[Enabled] Password is active. BIOS-Setup can only be opened
after the password is entered. No changes can be made,
except to the user password.
When the password is entered, the field is automatically switched
from [Disabled] to [Enabled] .
Set
Supervisor
Password
This field opens the ” Enter Password” dialog box. After the
supervisor password has been entered, it can be modified, deleted
with the ” Return” key and deactivated.
Set User
Password
This field opens the ” Enter Password” dialog box. After the user
password has been entered, it can be modified, deleted with the ”
Return” key and deactivated.
Password on
boot
[Disabled] No password required on booting.
[Enabled] Supervisor- oder user-password must be entered on
booting.
Fixed disk
boot Sector
Normal All types of access to the hard disk are permitted.
protected No operating system can be installed. This also provi-
des protections against boot viruses.
Diskette
access
This protection is only active, if Password on boot ” is [enabled].
Supervisor Access to the diskette is only possible if the supervisor
password was entered on booting.
User Access to the diskette is only possible if the user
password was entered on booting.
Settings
Motherboard